Free drill

Subnetting practice that shows its working.

Work out the network address, get graded the moment you submit, and see exactly why you were right or wrong. No sign-up.

Try it

Clear five targets before you run out of HP

Each target is a host address and a prefix. Two wrong tries and the answer is revealed with the working.

The Subnet Gate1/5
0XP

What is the network address of192.168.10.77/26?

The method

Subnet in three steps

The block-size method is fast enough for exam day. The full walk-through is in How to subnet in your head.

  1. 01

    Find the block size

    Take the first octet of the mask that is not 255 (for a /25 to /30 that is the last octet) and subtract it from 256. A /26 mask is 255.255.255.192, so the block size is 256 − 192 = 64.

  2. 02

    Find the block your address is in

    Count up in blocks of that size: 0, 64, 128, 192. The host octet 77 lands in the 64–127 block.

  3. 03

    Read off the answers

    The first address of the block is the network address, 192.168.10.64. The last is the broadcast address, 192.168.10.127. Everything between is usable: 2⁶ − 2 = 62 hosts.

Worked example

192.168.10.77/26

Mask
255.255.255.192
Block size
64
Network address
192.168.10.64
Broadcast address
192.168.10.127
Usable hosts
62

Questions about the drill

What it asks, how it grades and what it costs.

You get a host address and a prefix length, from /25 to /30 in the private ranges, and you work out its network address. Five targets make a quest, and every answer is checked the moment you submit.

The expected answer is computed from the address and prefix in the question, never typed in by hand, so a typo in the question bank cannot mark you wrong. A miss comes with the working: the mask, the block size and the block your address falls in.

You lose a point of HP and get a hint that points at the method without giving the answer away. After two wrong tries on a target, the answer is revealed with the full working, so you learn the method for the next one.

No. The drill runs in your browser and works without signing up. Accounts are not open yet; signing in now puts you on the list to be told when they are.

Subnetting is tested on the Cisco CCNA 200-301 and on CompTIA Network+. SimDrill is independent practice software and is not affiliated with Cisco or CompTIA.

Ready to see it work? Try a drill

Ready to pass the exam?Start drilling today

Practice that grades itself, so you always know why.

Try the first drill now. No sign-up needed.